Powerpoint for Shirts
Wear a different DIY Shirt everyday!
Fringe Tee taken from Urban Outfitters:
To achieve this look:
1. This is going to depend on your size and how
short you want the shirt to be, measure and markwith tailors
chalk 14” from mid shoulder and cut straight across.
2. The
great thing about jersey is that if you pull on it slightly it
will hide any imperfections in your cutting.
3. Take a measurement of the bottom of the T
and cut your fringe down to the correct size adding 1” to total
measurement.
4. Beginning at center back pin the fringe to
the bottom inside of the shirt overlapping ½”. (Be
creative with where you place the fringe. Another example is
shown in the photo below, around the neckline.)
5. Use
sewing machine or hand needle to stitch the fringe down.
Fabric glue could be used instead if you’re not an avid sewer,
just be sure not to over do it and allow the glue to seep
through to the right side of the fabric.
6. Wear and enjoy!